- Contact Person : Mr. Li Wei
- Company Name : Shenzhen Yuan Mechanical Electronic Co., Ltd.
- Tel : 86-0755-61110432
- Fax : 86-0755-61110431
- Address : Guangdong,Shenzhen city,4th floor, building 1, Heping industrial park, Science and technology road, Longhua town, Baoan district, Shenzhen
- Country/Region : China
- Zip : 518109
Card dispenser
1, Main characteristics
l Industrial design, adjust to high temperature and other bad environments;
l Simulated manpower friction card issuers ,better adaptability to various deformed cards;
l Watchdog of hardware and embedded operating system to ensure properly running;
l Pre-dispense function accelerate dispensing speed;
l Connectable with the vehicle detector to achieve card issuing and “one car, one card”;
l Automatic buzzer alarm when no cards, fewer cards or failure.
l Provide both RS232 and I/O voltage control interface;
l Automatic buzzer alarm when errors occur, automatic reset after 100 seconds alarm;
l Capacity of card stacker is more than 40pcs, automatic buzzer alarm when the withdrawing stacker is full;
l Slide card stacker with a capacity of 40pc;
l Adjustable of card stacker with a capacity of 120pc each;
l Automatic withdrawal to prevent card lost (only for TCD800F series
l Slide design to make installation and disassembling easier;
l Molded production to ensure high consistency of precision and quality.
2, Main technical data
l Operating voltage: 24VDC (max current 2A, static current 0.1A)
l Operating temperature: -20°C to 85°C
l Operating humidity: 30-90% (comparatively)
l Use condition: install in bin
l Card available: width: 54+/-0.5mm, Length: 85+/-0.5mm
l Thickness: 0.3-2.5mm (adjustable)
l Card material: Paper or Polyester card
l Net weight of card dispenser: 2.0kg (including the briquette)
l Time of issuing: max0.5s
l Capacity of stacker: 150pcs (0.8mm), 100pcs available when an extra stacker is needed
3, Control interface
This dispenser provides both I/O and RS232 interface of power level. PWL control interface is led by standard 12pin (2.54mm) socket CN3of the control board, RS232 control interface is led by the standard 3pin (2.54mm) socket CN7.
3.1 TTL control interface(CN3)
Pins | Signal Description | Pins | Signal Description |
1 | -24V | 7 | VD |
2 | +24 VDC | 8 | Callback |
3 | 0V | 9 | OutOK |
4 | Payout | 10 | Lower |
5 | Reset | 11 | Error |
6 | 0V | 12 | Empty |
3.2 RS232 control interface
Pins | Signal Description | Signal Description |
1 | GND | Ground |
2 | RXD | RS232 receive port |
3 | TXD | RS232 send port |
3.3 DIP settings and the function definition(CN9)
DIP1 | ON | pre-read issuing card |
OFF | directly issue card | |
DIP2 | ON | OUTOK as the getting card signal |
OFF | OUTOK as the card on signal | |
DIP3 | ON | ignore VD input signal |
OFF | input VD signal | |
DIP4 | ON | forbid recovering overtime 100s |
OFF | Allow recover overtime 100s |
4,Dispenser working states indication
NO. | Card dispenser Working states | Buzzer Output | Port Output |
1 | Reset | Consecutive ring“toot toot” | No |
2 | Lack card (can dispense card) | Interval ring “toot” | Lower |
3 | Jam card (can’t dispense card) | Interval ring “toot toot” | Error |
4 | Overtime error (can’t dispense card) | Interval ring “toot ,toot, toot” | |
5 | Warehouse full (can dispense card) | Interval ring “toot,toot ,toot, toot” | |
6 | Empty | Interval ring “toot,toot ,toot,toot, toot” | Lower |
Card dispenser
